PLA Spring Motor
By Andrew Gregory. Posted
This article was originally published as part of HackSpace magazine, which has since been incorporated into Raspberry Pi Official Magazine.
After spending years designing and programming video games for Tandy, Atari, Electronic Arts, and many others, plus even more years designing flight control systems, Greg Zumwalt retired, purchased a 3D printer and started designing models for 3D printing.
"In my early 3D printing days, most of my time was spent trying to determine what I could and could not 3D-print in PLA on a 3D printer. In early 2014, I began testing whether a 3D printer could print a PLA spring motor, and the PLA Spring Motor Demonstrator was the result."
Ask an Engineer – exclusive advice from the brains behind Raspberry Pi
"I was impressed enough with the PLA Spring Motor Demonstrator test to attempt to design, 3D-print, and assemble a variety of wind-up vehicles, including a wind-up car, wind-up bunnies, wind-up helicopters, and more."

"I recently decided to revisit the original PLA Spring Motor Demonstrator design, using Autodesk Fusion 360, and the PLA Spring Motor Demonstrator II is the result."
"The design incorporates the use of Fusion 360 ‘parameters’, allowing me to alter sizes and clearances between the gears, axles, and axle mounting holes, with ease. As a result of this update, it will be much easier to design and print PLA Spring Motor-based models."
If you fancy making your own spring motor, Greg has shared instructions to make it, including the design files at www.instructables.com/id/PLA-Spring-Motor-Demonstrator-2/. For lots more designs, check out Greg's YouTube channel.
Features Editor Andrew trawls the internet for Cool Stuff while keeping the magazine running smoothly.
Subscribe to Raspberry Pi Official Magazine
Save up to 37% off the cover price and get a FREE Raspberry Pi Pico 2 W with a subscription to Raspberry Pi Official Magazine.
More articles
Ask an Engineer in Raspberry Pi Official Magazine issue 172
It’s not just our engineers who are building things: Kat Shann, documentation specialist at Raspberry Pi, has built an intriguing way to commune with the spirit world via a Raspberry Pi-controlled ouija board. Inspired by the cyber-pet craze of the 1990s, Tara Carter has built her own, using a Raspberry Pi Zero 2 W to […]
Read more →
Win a CrowView Note & Raspberry Pi 5
Portable Raspberry Pi computing
Read more →
Raspberry Pi Cinema Camera
As in, it’s a cinema-grade quality camera. Created by menggu
Read more →