Elecrow has decided to go a little further, and a little different, by creating a version of Pico 2 that not only has a USB-C port, but also has a bump in the amount of storage it uses – doubling the 4MB of onboard storage to a whopping 8MB. Due to the way Pico is used as a microcontroller, you don’t need much storage; however, it’s always nice to have a slightly larger limit to work to.

Chunky wireless

This Pico 2 alternative uses a different wireless chip, too. While the standard Pico 2 W adds a noticeable chip to the board for wireless radio, the version here is a fair bit bigger – although it does offer 5GHz connectivity. So while it keeps just about the same dimensions as your standard Pico 2, the extra bulk on the PCB is something to bear in mind.

Otherwise it works like a Pico. With RP2350 powering it, all code is compatible and so is any hardware you can connect to it. W5 also comes with a handy reset button, which we always like to see. It’s definitely an elevated version of Pico 2, and with an excellent price point to match.

Verdict

9/10

A great alternative to your standard Raspberry Pico 2 W at the same price point, but you can’t quite slip it into every Pico-specific use-case – just most of them.

Price: £5/$7 Elecrow

Specs

Dimensions: 51mm × 21mm, same as Raspberry Pi Pico

Connectivity: USB Type-C, wireless LAN 802.11a/b/g/n 2.4GHz/5GHz, Bluetooth, 40-pin GPIO

Storage: 8MB flash