After Sophy Wong’s SelfieBot wakes from a snooze, it makes a cute noise, sings a song, winks at a passer-by, and then blinks silently. Or at least, it does if it’s left alone for long enough: its ability to capture fun photos and print them on to thermal paper ensures it’s nearly always in demand.

SelfieBot sprung into life in 2017 when Sophy and her husband Kim Pimmel created an early version for their local Seattle Mini Maker Faire. “We thought that if we created a fun selfie-taking experience, with something visitors could take home like a printed photo, it would encourage people to the booth and give them another way to interact with our projects.”

The plan worked a treat. SelfieBot – mains-powered and made from laminated laser-cut plywood – went down a storm, so the couple decided to refine the concept for 2018. Rather than have it tethered to one location, they opted for a mobile version.

“I redesigned the circuit so that it could be powered by a small 7.2 V NiMH battery like the ones in radio-controlled cars,” Sophy explains. The idea of putting a Raspberry Pi 2 at its heart remained, however.

“We hardly print anything these days, especially photos, so it’s a lot of fun”

The Pi is connected to a Pi Cobbler which routes all of the Pi’s GPIO pins to a Perma-Proto board. A Pi Camera Module V2 is used to take photos, while a mini metal speaker is hooked up to an Adafruit mono 2.5 W class D audio amplifier, to allow the SelfieBot’s sounds and jokes to be clearly heard.

For its face, which beams bright from a 5-inch HDMI display, the couple conducted a lot of research. “We analysed the features of cute robots and scary robots, knowing that we wanted a face and sounds that were appealing, cute, and non-threatening,” Sophy says.

Quick facts

More Raspberry Pi projects like this one